background image

 

EZ Answer

returned, the appropriate message is played back to the calling 
party.

The 

ring

 signal has a very specific cadence and any response 

not 

matching the ringing sequence of 1 second ring - 3 second 
silence

 will be taken as 

answered

 and the caller will be connected 

to that extension.

Enter 

206 n 

where 

n = 3 

to

 9 

rings

For all other digits, the unit will prompt the message 

“This 

entry is invalid”

.

Default value   = 

3

Length of entry = fixed 1 digit

Program # 246:

To listen to the currently programmed value for the Number of 
rings for No Answer   -

You will hear:         “ Two Four Six (0.6 sec silence) Three”

Program # 207:

To enter the list of Invalid Extensions -

Under this program, the extensions are entered one by one.   
After entering the program number, enter the first extension to 
be placed in the 

list-of-invalid-extensions

. The extensions must 

be of a fixed length as programmed under 

Program No. 204. 

The 

unit will check for validity and store that extension in the 
memory 

and then give 2 short beeps 

to indicate that you can 

now enter the next extension.

 

An all-0 extension is invalid and a 

*

 in the extension is invalid. If 

an invalid extension is entered, the unit will prompt 

“This entry 

is invalid”

 and return to the 

“Enter Program number”

 

30

Содержание EZ ANSWER





















































Отзывы: