background image

 

EZ Answer

You will hear:   “ Two Five Zero (0.6 sec silence)”

The 

#

 at the end is not prompted. 

Program # 211:

   

Operation Mode   

(only for 2 port units)

Default value: 

211 0

0 = Common mode of operation
1 = Individual mode of operation

The 2 port unit is capable of operating in a `individual mode' or 
`common mode'. 

In the individual mode, the 2 ports are independent of each 
other and a separate set of program parameters and / or main 
greeting message may be programmed for each of the 2 ports. 
The 2 ports may be connected to two different PBXs also.   For all 
practical purposes, they are like two separate 1 port units.

In the common mode, when either port enters into the 
programming mode, it signals the other port   which will 
terminate its current activity, even if it is answering a caller   and 
both ports will be ready to accept program inputs. Hence, all 
program parameters will be common between the two ports.

If a voice prompt program is invoked (to ascertain a 
programmed value), the called port will play the message and 
the other port will remain idle.

Whenever this program is invoked, on exiting, both ports will 
reset and restart. If the units were working in the common mode, 
and the programming is changed to `individual mode', after 

35

Содержание EZ ANSWER





















































Отзывы:

Похожие инструкции для EZ ANSWER