EZ Answer
Select a suitable location for the
EZ ANSWER
to be placed - it
may be wall mounted or kept on the tabletop. A suitable location
should have one or two phone extension sockets and a power
socket close by, should be easily accessible for any service or
maintenance work.
Plug in the Wall Power adapter into the Power socket and insert
the other end into the Power input connector on the
EZ
ANSWER
. Switch on the power to the unit. The Power lamp on
the unit should flash rapidly for about 2 seconds, then remain
steady for a second and then continue to flash once a second,
indicating that it is now in normal operation.
Insert the modular connector in the line jack on the unit and
insert the other end into the wall extension socket for both the
ports. Sometimes, when the power is first applied or when the
phone cord is inserted, the Power lamp may glow steadily for
about 5 seconds before returning to the slow On-Off flashing
state. This is normal and need not cause any concern.
If the OVER FLOW pickup function is also to be used, these
connections from the PBX will need to be brought to the
EZ
ANSWER'
s location.
On the Two-port Auto Attendant, the Overflow inputs are
common to both the ports. However, to avoid both ports picking
up the Overflow call at the same time, Port 2 is programmed to
wait for one relay closure more than Port 1. For example, if 5 is
the `number of closures' programmed under program #210,
Port 1 will pick up the call after 5 closures. If Port 1 is busy
answering a call, Port 2 will pick up the call after total of 6 relay
closures.
You are now ready to do a
Functional Check
of the unit and then
put it into operation.
6
