DVS 304 • Ethernet Control
Ethernet Control, cont’d
4-7
Figure 4-6
—
Firmware Upgrade page
The Firmware Upgrade page is
only
for replacing the firmware that controls
all scaler operation. To insert your own HTML pages, see “File
Management” later in this chapter.
Insure that your PC is connected to the DVS 304 scaler via the scaler’s Ethernet
port. Update the scaler firmware as follows:
1
.
Visit the Extron web site at
www.extron.com
.
2.
Select the DVS 304 product category from the “Product Shortcut”
drop-down box, and select the latest firmware file for download.
3.
Note the folder to which you save the firmware file.
4.
Connect the PC to the DVS 304 scaler via the scaler’s Ethernet port.
5
.
Access the DVS 304 scaler using the on-board Web server.
6
.
Click the Configuration tab.
7
.
Click the Firmware Upgrade link.
8
.
Click the Browse button. An open file window appears.
9
.
Navigate to the folder where you saved the firmware upgrade file. Select the
file.
Valid firmware files must have the file extension “.S19”. Any other file
extension is
not
a firmware upgrade.
The original factory-installed firmware is permanently available on the
DVS 304 scaler. If the attempted firmware upload fails for any reason, the
scaler automatically reverts to the factory-installed firmware.
10
.
Click the Open button.
11.
Click the Upload button. The firmware upload to the DVS 304 scaler may
take a few minutes.
File Management
The File Management page (located under the File Management tab), is a useful
tool that allows you to use and upload existing and custom Web pages. Custom
pages can be developed using a third-party Web page development program
such as FrontPage or Dreamweaver. File management also allows you to remove
unnecessary or outdated files when they are no longer needed.
To add or update files:
1.
Select the File Management tab and the File Management screen (figure 4-7)
is displayed.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
