2-3
DVS 304 • Installation and Operation
5
.
Attach the rack shelf to the rack using four 10-32 x ¾” bolts (provided).
Insert the bolts through #10 beveled washers, then through the holes in the
rack ears and rack (figure 2-1).
Rack mounting the DVS 304 A
To mount the DVS 304 A in a rack, do the following:
1
.
If feet were installed on the bottom of the DVS 304, remove them.
2.
Attach the included rack/through-desk mounting brackets
(part #70-077-03) to the unit using eight machine screws supplied with the
mounting kit.
#8 Screw
(4 Plcs)
Each Side
Figure 2-2 — Attaching the mounting brackets
3.
Insert the unit into the rack and align the holes in the mounting brackets
with the holes in the rack. Use four machine screws to attach the brackets
to the rack.
Rack Mount
Bracket
Figure 2-3 — Rack mounting the DVS 304 A
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
