Installation and Operation, cont’d
DVS 304 • Installation and Operation
2- 20
Exit menu
From this submenu, press the Menu button to return to the Start Auto Image
menu cycle, or press the Next button to return to the default sequence.
START AUTO
IMAGE ON IN1
MENU
MENU
INPUT
CONFIG
MEMORY
PRESETS
2 sec.
INPUT 1
COMPOSITE
OUTPUT
1024 x 768@60
Default Cycle
2 sec.
IP
CONFIG
MENU
MENU
ADVANCED
CONFIG
MENU
MENU
TO EXIT MENU
PRESS NEXT
MENU
PICTURE
CONTROL
MENU
OUTPUT
CONFIG
MENU
AUDIO
CONFIG
(Audio models only)
MENU
NEXT
Figure 2-19 — Exit menu
Resetting an Input
Each input of the DVS 304 scaler can be reset to its default value by holding
down the specific input button until the input number and RESET message is
displayed on the LCD screen.
Resetting the Unit
There are four reset modes (numbered 1, 3, 4, and 5) that are available by
pressing the Reset button on the rear panel. The Reset button is recessed, so use
a pointed stylus, ballpoint pen, or Extron Tweeker to access it. See the following
table for a summary of the reset modes.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203