![Extron electronics Digital Video Scaler Series Скачать руководство пользователя страница 34](http://html1.mh-extra.com/html/extron-electronics/digital-video-scaler-series/digital-video-scaler-series_user-manual_2456323034.webp)
Installation and Operation, cont’d
DVS 304 • Installation and Operation
2- 18
Use either the Adjust horizontal
(
)
or Adjust vertical
(
) knob to select this
mode. The default state is “Off”.
The Blue mode is not effective for RGB pass-through.
Autoswitch mode
The Autoswitch mode causes the highest numbered input, which has a signal
present, to be automatically selected. For example, if both inputs 1 and 3 have
active input signals, input 3 will be selected.
From this submenu, use either the Adjust horizontal
(
)
or Adjust vertical
(
)
knob to specify this mode as “On” or “Off”. The default is “Off”.
The Autoswitch mode ignores the presence of an SDI input signal, so any
input which is assigned an active SDI signal will not be selected.
RGB Delay
The RGB delay feature applies a brief delay before displaying a new picture to a
screen. This delay allows the display device to adjust to the new sync timing.
This feature provides “no-glitch” switching.
You can set the blanking period from 0 to 5 seconds in 0.5 second steps.
OSD label
Use the On-Screen Display (OSD) label menu to determine the time allotment for
an input label or a user defined OSD label. Input labels are generic labels shown
for inputs 1, 2 and 3. On input 4, a user can create custom OSD text to display on
the screen.
These labels are displayed in a white box with black text in the upper left-hand
corner.
The OSD label can be turned off by setting its duration to “Off” from the
Advanced Configuration menu. For OSD text, note the following:
• Line 1 displays the input number.
• Line 2 displays the input type.
• Line 3 displays a text label that you can define (input 4 only).
You can set the display time from 0 to 5 seconds in 1 second steps. The default
setting is 2 seconds.
Test pattern
Test patterns are useful when the DVS 304 is used to output differing resolutions.
Choose a test pattern to properly adjust the image using built in cropping,
alternating pixels, and color bars.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203