Extron electronics AXP 64 C AT Скачать руководство пользователя страница 28

Страница: 28 / 53

AXP 64 C AT • DSP Configurator Configuration

Presets Drop-Down List

Select the

Presets

drop-down list (see the image at the right) to

view and apply presets saved in the current configuration file or
on a device connected in

Live

mode. Presets with an asterisk

next to them are on the AXP 64 C AT, but not in the current
configuration file. Run a preset to load it into the configuration file.

Alternatively, perform a backup to run all presets and load them into the current
configuration file (see

File

on page 18).

After selecting a preset from the list, choose one of the following actions from the
DSP Configurator status panel:

•

Recall

— Recalls the selected preset and applies settings to the main workspace.

•

Cancel

— Cancels the preset recall and returns to the main workspace with the current

emulation or state intact.

•

Delete

— Deletes the selected preset from the configuration.

DSP Configurator Status Panel

This

Bar

panel displays the current status of DSP Configurator and shows when data

is being pushed to or pulled from the device. When the software is ready to perform actions,
the panel displays

Ready

Live and Emulate Panel

The

Live

and

Emulate

buttons (see image at

the right) allow users to switch between

Live

and

Emulate

mode and displays transmit (Tx)

and receive (Rx) activity when in

Live

mode.

Live Mode

Enter

Live

mode to connect to a AXP 64 C AT and push or pull configurations between the

device and host PC. In

Live

mode, changes made in DSP Configurator are directly applied

to the device. Additionally, presets and macros can be created and stored on the device.
When entering

Live

mode, the user is prompted with the

Connect

device

dialog box.

Connect to a AXP 64 C AT in Live Mode

Click the

Live

button in the menu bar of the DSP Configurator.

Alternatively, select

Tools > Connect

Device

or press <

> on the keyboard.

The

Connect

device...

dialog box opens (see

figure 16

on page 21).

Connect to the AXP 64 C AT.

To connect via TCP/IP:

•

Click the TCP/IP tab in the dialog box. Enter the IP address of the device in the

Hostname or IP Address

field. If necessary, enter the device password in the

Password

field (

To connect via USB:

•

Click the

USB

tab in the dialog box.

•

Select the device from the

USB

Devices

drop-down list (

Содержание AXP 64 C AT






















































Результаты поиска

Содержание AXP 64 C AT

Отзывы:

Extron electronics AXP 64 C AT, Руководство пользователя, Страница: 28 / 53

Результаты поиска

Содержание AXP 64 C AT

Отзывы: