Extron electronics AXP 64 C AT, Руководство пользователя

Страница: 36 / 53

AXP 64 C AT • Dante Configuration and Operation 28
The default names shown in the Dante Receivers column and Dante Transmitters row
are extracted from the Dante interface of the connected device (see figure 22,
1
and
2
).
The receivers are labelled EXP_In-01 through EXP_In-48 because the AXP 64 C AT can
receive signal at the 48 EXP inputs.
The first set of transmitters is labelled
Output-01
through
Output-08
because the
AXP 64 C AT can transmit signals routed to the analog outputs to the Dante network.
The second set of transmitters is labelled
EXP-Out-01
through
EXP-Out-16
because the
AXP 64 C AT can transmit signals routed to the EXP outputs to the Dante network.
To rename a AXP 64 C AT receiver or transmitter:
Figure 23. Device View Screen — Renaming a Receiver or Transmitter
1. From the
Device
menu on the
Network View
screen, select Device View , or press
<Ctrl+D> on the keyboard. The
Device View
dialog box opens.
2. From the (Select a Dante Device..) drop-down list, select the name of the desired
AXP 64 C AT (see figure 23,
1
).
3. On the Device View screen, select the Receive tab or Transmit tab (
2
) as desired.
4. Click on the name of the receiver or transmitter to be renamed. The name becomes a
text box with a cursor (
3
).
5. Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for
@
,
=
, and
.
(period).
6. Press <Enter> on the keyboard to confirm the name, or click another channel text box.
7. Repeat steps 4 through 6 to rename additional receiver or transmitter channels.
8. When finished renaming receivers and transmitters, close the Device View dialog box.
23