Extron electronics Annotator, Руководство пользователя

Страница: 31 / 107

Front Panel Operation, cont’d
Annotator • Front Panel Operation
3-10
3. After tapping the fourth cross, the unit saves the calibration data and restarts
the sequence. Repeat the process for each connected touch screen.
4 . Press any front panel button to exit the sequence and save the data.
N
See page 4-2 for detailed touchscreen setup instructions.
Capture/Recall settings (front panel activated)
A snapshot of the currently displayed image (including annotations) can be
captured and saved to the Annotator memory using the front panel Capture/Recall
button, the Next button, and the two Adjust knobs. This image or any other saved
image can then be recalled and output to the active display at a later time.
To capture an image:
1 . Press and hold the Capture/Recall button for 3 seconds. The LCD displays
“IMAGE CAPTURE”.
2 . Press Next to enter the save menu, the LCD displays “Save As: <N/A>”.
Use either Adjust knob to scroll through 16 image names, (IMG01.bmp
through IMG16.bmp) to select a suitable name.
N
When saving an image to a selected name, any image previously saved with that
selected name is overwritten in favor of the newly saved image.
3 . When the desired image name is reached, press Next. The LCD displays
“Saving image Please wait”. The display then changes to “Saving image”
and a progress bar begins showing the progress of the image capture process.
When the image is saved the LCD reverts to the default menu cycle.
N
Custom image names can be used when image captures are initiated using the
appropriate SIS commands.
Press and hold
for 3 seconds.
CAPTURE/
RECALL
IMAGE
CAPTURE
Step
1
LCD screen displays
UNDO/
CLEAR
ADJUST
Rotate either
adjust knob.
Save As:
<N/A>
MENU
NEXT
Press
LCD screen displays
Save As:
IMG05.BMP
LCD screen displays
Saving Image
Please wait
MENU
NEXT
Press
LCD screen displays
then
Saving image:
Step
2
Step
3