manualshive.com logo in svg

Extron electronics Annotator, Руководство пользователя

Поделиться
Скачать
Extron electronics Annotator Скачать руководство пользователя страница 82

7-3

 

Annotator • HTML Operation

 

 

The Annotator checks several possibilities, in the following order, and then 

responds accordingly:

•

  Does the address include a specific file name, such as 192.168.254.254/

file_name.html?  

If so

, the unit downloads that HTML page.

•

  Is there a file in the device’s memory that is named “index.html”?

If so

, the device downloads “index.html” as the default startup page.

•

 

If neither of the above conditions is true

, the device downloads the 

factory-installed default startup page, “nortxe_index.html” (figure 7-2), 

also known as the System Status page.

Any of the five main pages (System Status, Configuration, File Management, 

Control, and Images) can be accessed at any time by clicking on the relevant tab.  

Some of the main pages have a series of sub-pages, accessible by clicking on the 

links in the sidebar menu.  

System Status Page

The System Status page (figure 7-2) displays system information (unit name, model, 

firmware version, etc.), IP settings, and serial port settings.  The page updates itself 

periodically to reflect the latest status of the Annotator components.  If a variable 

changes, the display shows the change in status the next time it updates.  

Figure 7-2

 —

 System Status page

Содержание Annotator












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды