manualshive.com logo in svg

Extron electronics Annotator, Руководство пользователя

Поделиться
Скачать
Extron electronics Annotator Скачать руководство пользователя страница 84

7-5

Annotator • HTML Operation

 

Unit Name field

The Unit Name field contains the name used as the “from” information when the 

Annotator e-mails notification of its failed or repaired status.  This name field can 

be changed to any valid name, up to 24 alphanumeric characters.

N

  The following characters are invalid in the device name: 

+  ~  ,  @  =  ‘  [  ]  {  }  <  >  ’  “  ;  :  |  \

  and 

?

.

DHCP radio buttons

The DHCP On radio button directs the device to ignore any entered IP addresses 

and to obtain its IP address from a Dynamic Host Configuration Protocol (DHCP) 

server (if the network is DHCP capable).  
The DHCP Off radio button turns DHCP off.  Contact the local system 

administrator to determine this control’s setting.

IP Address field

The IP Address field contains the IP address of the Annotator.  This value is 

encoded in the unit’s flash memory.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfields separated by 

dots (periods).  Each field can be numbered from 000 through 255.  Leading zeros, 

up to 3 digits total per field, are optional.  Values of 256 and above are invalid.
The factory-installed default address is 192.168.254.254, but if this conflicts with 

other equipment at your installation, you can change the IP address to any valid 

value.

N

  IP address changes can cause conflicts with other equipment.  Only local system 

administrators should change IP addresses.

Gateway IP Address field

The Gateway IP Address field identifies the address of the gateway to the mail 

server to be used if the device and the mail server are not on the same subnet.
The gateway IP address has the same validity rules as the system IP address.

Subnet Mask field

The Subnet Mask field is used to determine whether the Annotator is on the same 

subnet as the mail server when you are subnetting.  

For more information, see 

“Subnetting — A Primer”, in Appendix B, “Ethernet Connection”.

MAC Address field

The Media Access Control (MAC) Address is hard coded in the device and cannot 

be changed.

Firmware field

This field shows the firmware version number.  This field changes only when the 

firmware is updated.

Model field

This field shows the model (Annotator) and cannot be changed.

Part Number field

This field shows the Annotator part number (60-968-xx) and cannot be changed.

Содержание Annotator












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды