Extron electronics Annotator, Руководство пользователя

Страница: 36 / 107

3-15
Annotator • Front Panel Operation
Input 1
Input 6
Input 5
Input 4
Input 3
Input 2
Input 64
Output 1 Input 3
Output 6 Input 3
Output 5
Output 4
Output 3
Output 2 Input 3
Annotator #1
Annotator #6
(optional)
Annotator #2
(optional)
Output to display
Output to display
Output to display
Output 4
Output 3
Matrix
Switcher
Figure 3-8 — Multiple Annotator’s connected to a Matrix switcher
3 . On the Annotator, configure the input as follows:
a) . Switch to input 3 on the Annotator.
b) . Set the following input sampling settings as needed: signal type,
horizontal and vertical start, pixel phase, total pixels, active pixels, and
active lines
N Do not use auto detect setting for the input type when using input presets.
c) . Set the following picture controls as needed: size, position, color, tint,
brightness, contrast, and detail.
d) . Save the adjusted settings as input preset 1. Refer to chapter 5,
“Programmers Guide”, for the SIS commands to save the preset.
N
Each input preset must be saved with the same number as the input on the
matrix switcher. For Example, input 24 on the matrix will be associated with
the input preset 24 on the Annotator.
e) . Repeat steps 2 and 3 for each matrix input that is used on the Annotator.
4 . Synchronize the Annotator to the matrix switcher as follows:
a) . Open the control program (SPPCP) and connect to the Annotator.
N Connection must be via IP (not RS-232).
b) . From the Tools menu, select Sync to
Matrix Switcher... . The Sync to Matrix
Switcher window opens
c) . In the IP Address field, enter the matrix
switcher’s IP address.
d) . Click Connect to Matrix button. The
matrix switcher’s size is displayed.
e) . From the drop-down menu next to
Annotator Input #3 select the matrix
output number that is connected to Input 3 on the Annotator. Click
Take
.
The devices now sync.
N
All other inputs on the Annotator must not be used when it is synchronized to a
matrix switcher.