Extron electronics Annotator, Руководство пользователя

Страница: 60 / 107

SIS Programmer’s Guide, cont’d
Annotator • SIS Programmer’s Guide
5-18
Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
Resets
Erase user-supplied Web pages
and files
E
filename EF
}
Del• filename
]
Erase current directory and
files
E
/EF
}
Ddl
]
Erase current directory and
subdirectories
E
//EF
}
Ddl
]
Erase flash memory
E
ZFFF
}
Zpf
]
Reset all device settings to
factory default settings
E
ZXXX
}
Zpx
]
Absolute system reset
E
ZQQQ
}
Zpq
]
Includes resetting IP to
192.168.254.254 and subnet
mask to 255.255.000.000.
Absolute system reset (but
retain IP)
E
ZY
}
Zpy
]
N This reset is similar to ZQQQ but excludes IP address, subnet mask, gateway addresses, unit name, DHCP setting, and
port mapping (telnet/web/direct access) in order to maintain communications with device. Recommended after a firmware
update.
Information request
General information I/i
Vid
X!
•Typ
X#
•Std
X1!
•Blk
X1)
•Hrt
X1#
•Vrt
X1#
•Pip
X!]
Query firmware version Q/q
x.xx
]
Query part number N/n
68-968-xx
]
View part number.
View internal temperature
E
20STAT
}
STAT20•
X1@]
Temperature in degrees
Celsius.
N
X!
= Input selection 1 – 7
X#
= Input video format 1 = RGB (default), 2 = YUVp/HDTV, 3 = RGBcvS, 4 = YUVi, 5 = S-video
6 = Composite video, 7 = SDI, 8 = HD-SDI, 9 = DVI, 10 = Auto detect
X1)
= Off/Disable (0), On/enable (1)
X1!
= Input standard 0 = No signal, 1 = NTSC, 2 = PAL, 4 = SECAM,
- = N/A (occurs when input is set to a high resolution signal format)
X1@
= Internal temperature Degrees Celsius
X1#
= Horizontal/vertical frequencies, format is three digits (e.g., 075.3)