Extron electronics Annotator Скачать руководство пользователя страница 38

Страница: 38 / 107

Annotator • On Screen Annotation

4-2

On Screen Annotation

The Extron Annotator is a high performance, hardware-based annotation processor

for video and computer-video sources. Annotating over motion video or still

images is possible using common touchscreen panels, as well as any standard

keyboard and/or mouse. The touchscreen panels can be connected by RS-232 or

USB. An RS-232 touchscreen device driver can be uploaded to ensure compatibility

with the Annotator. A number of touchscreen panels are supported.

For a full list of compatible panels visit

www.extron.com.

Contact the Extron

HelpLine if the device you wish to use is not listed.

RS-232 driver configuration

RS-232 driver configuration is possible using the Signal Processing Products

Control Program. The Touch Screen Panel Configuration option allows you to

configure a touchpanel so that it can be used with the Annotator.

Using a NULL RS-232 cable only

, connect the touchscreen to the Annotator via

either of the two rear panel RS-232 comm ports.
To configure a touchpanel for use with the Annotator:

Open the SPPCP program on a PC connected to the Annotator by an IP

connection.

From the Tools menu, select RS-232 Touch Screen Panel Configuration. This

opens the Touch Screen Configuration window.

In the appropriate section, depending on which COM port has a touchpanel

connected, select the type of touchpanel from the drop-down list. This

enables the

Upload Driver

button.

Figure 4-1 — Touch Screen Configuration screen

Click

Upload Driver

. This uploads the appropriate touchpanel driver

A dialog box indicates progress. The box closes when the driver has been

uploaded.

To delete a driver from an attached touchpanel:
Follow steps

and

above if necessary.

In the appropriate section, depending on which COM port has the touchpanel

connected, click

Delete Driver

. This deletes the driver associated with the

touchpanel.

Содержание Annotator












































































































Результаты поиска

Содержание Annotator

Отзывы:

Бренды по названию

Популярные бренды

Extron electronics Annotator, Руководство пользователя

Результаты поиска

Содержание Annotator

Отзывы:

Бренды по названию

Популярные бренды