S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
1-3
S
UMMARY
OF
F
EATURES
Figure 1-1
shows the front view of the Summit1.
Figure 1-1: Summit1 front view
The Summit2 is a workgroup switch featuring sixteen 10Base-T/100Base-TX ports, two
Gigabit Ethernet uplinks, and one redundant Gigabit Ethernet uplink. The
10Base-T/100Base-TX ports use standard RJ-45 connectors. They are autosensing for
10/100 Mbps operation, as well as half- or full-duplex operation. The Gigabit Ethernet
interfaces support the GBIC connector, and ship with standard 1000Base-SX, 850nm
GBIC modules. Additional cable types are also supported.
Figure 1-2
shows the front view of the Summit2
Figure 1-2: Summit2 front view
Port status LEDs
Gigabit Ethernet ports
Unit status LEDs
Gigabit Ethernet ports
Port status LEDs
10/100 Mbps ports
Unit status LEDs
Gigabit Ethernet ports
SUMMIT.BK Page 3 Thursday, September 25, 1997 12:33 PM
