3-8
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
A
CCESSING
T
HE
S
WITCH
D
ISCONNECTING
A
T
ELNET
S
ESSION
The administrator-level account can disconnect a management session that has been
established by way of a Telnet connection. If this happens, the user logged in by way of
the Telnet connection is notiÞed that the session has been terminated.
To terminate a Telnet session, follow these steps:
1
Log in to the Switch with administrator privileges.
2
Determine the session number of the session you want to terminate by typing
show session
Sample output from the
show session
command is as follows:
show session:
0 Wed Sep 17 20:48:38 1997 admin console serial
4 Wed Sep 17 21:52:16 1997 admin telnet 192.208.37.26
3
Terminate the session by using the following command:
clear session <session_number>
D
ISABLING
T
ELNET
A
CCESS
By default, Telnet services are enabled on the Switch. You can choose to disable Telnet
by entering
disable telnet
To re-enable Telnet on the Switch, at the console port enter
enable telnet
You must be logged in as an administrator to enable or disable Telnet.
U
SING
THE
W
EB
I
NTERFACE
Any properly conÞgured standard Web browser that supports frames (such as Netscape
Navigator 3.0 or Microsoft Internet Explorer 3.0) can manage the Switch over a TCP/IP
network. To use the Web interface, at least one VLAN on the Switch must be assigned
an IP address.
SUMMIT.BK Page 8 Thursday, September 25, 1997 12:33 PM
