4-28
S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
C
OMMANDS
use config {primary | secondary}
Configures the Switch to use a particular
configuration on the next reboot. Options
include the primary configuration area, or the
secondary configuration area. If not specified,
the Switch will use the primary configuration
area.
use image {primary | secondary}
Configures the Switch to use a particular
image on the next reboot. If not specified, the
Switch will use the primary image.
download image <ipaddress> <filename>
{primary | secondary}
Downloads a new image from a TFTP server.
You must specify the IP address of the TFTP
server and the image filename. You can
optionally specify if you want the file
downloaded to the primary or secondary
image. If you do not specify, the file is
downloaded to the primary image.
Table 4-19: Configuration and Image Commands (continued)
Command
Description
SUMMIT.BK Page 28 Thursday, September 25, 1997 12:33 PM
