S
UMMIT
S
WITCH
I
NSTALLATION
AND
U
SER
G
UIDE
3-7
U
SING
T
ELNET
3
At the login prompt, enter your user name and password. Note that they are both
case-sensitive. Ensure that you have entered a user name and password with
administrator privileges.
Ñ
If you are logging in for the Þrst time, use the default user name
admin
to log in
with administrator privileges. For example:
login: admin
Administrator capabilities enable you to access all Switch functions. The default
user names have no passwords assigned. For more information on switch
security, refer to
ÒConÞguring Management Access
,Ó on
page 3-1
.
Ñ
If you have been assigned a user name and password with administrator
privileges, enter them at the login prompt.
4
At the password prompt, enter the password and press [Return].
When you have successfully logged in to the Switch, the command-line prompt
displays the name of the Switch in its prompt.
5
Assign an IP address and subnetwork mask for the default VLAN by using the
following command:
config vlan <name> ipaddress <ipaddress> {<subnet_mask>} {<metric>}
For example:
config vlan default ipaddress 123.45.67.8 255.255.255.0 1
Your changes take effect immediately.
6
ConÞgure the default route for the Switch using the following command:
config iproute add default <ipaddress> {<metric>}
For example:
config iproute add default 123.0.0.1
7
Save your conÞguration changes so that they will be in effect after the next Switch
reboot, by typing
save
For more information on saving configuration changes, refer to
Chapter 11
.
8
When you are Þnished using the facility, log out of the Switch by typing
logout
SUMMIT.BK Page 7 Thursday, September 25, 1997 12:33 PM
