Extreme Networks ExtremeRouting SLX 9850-4, Руководство по установке оборудования

Страница: 27 / 158

TABLE 16 Installation prerequisites (continued)
Task Task details or additional information Completed
• Subnet mask:
• Default gateway:
• Domain ID:
• Time zone:
Installation and initial configuration
The initial setup includes mounting the device in a rack and completing the configuration tasks necessary to bring the device online and
verify the operation.
TABLE 17 Installation and basic system configuration
Task Task details or additional information Completed
Mount the device. Choose the two-post or the four-post rack mounting option. Refer to Mounting options
on page 31 .
Install the interface modules, power supply
modules, switch fabric modules, and fan
modules. Refer to Inserting an interface module on page 97, Inserting an AC power supply
module on page 108, Inserting a switch fabric module on page 122, and Inserting a
fan module on page 117.
Refer to Inserting an interface module on page 97, Inserting an AC power supply
module on page 108 or Inserting a DC power supply module on page 109, Inserting a
switch fabric module on page 122, and Inserting a fan module on page 117.
Gather all components required for the initial
setup. Refer to Initial Setup and Verification on page 57.
Provide power to the device. Refer to Providing power to the device on page 58.
Attach a management station, establish a
serial connection, and change the default
passwords (optional). Refer to Establishing a serial connection on page 63. After completing this task, log in
to the serial port to configure the device.
Set the IP address, subnet mask, and the
default gateway IP address. Use the chassis virtual-ip or chassis virtual-ipv6 command to configure an IP address.
For more information, refer to Configuring a static IP address on page 66.
Establish an Ethernet connection. By establishing an Ethernet connection, you can complete the device configuration
using a serial or Telnet session. Refer to
Establishing an Ethernet connection on page
68 for more information.
Customize the chassis and host names. Use the switch-attributes chassis-name and switch-attributes host-name commands
to change the default router name. For more information, refer to the Customizing the
chassis and host names on page 69
Set the date and time.
• Use the clock set command to set the date and time.
• Use the clock timezone command to set the time zone.
• After you configure the system time, use commands in NTP configuration
mode to synchronize the time with an external NTP server.
Refer to Setting the date and time on page 70 for more information. For detailed
command information, refer to the Extreme SLX-OS Management Configuration Guide
for the SLX 9850 Router .
Optional: Configure the DNS service. Use the ip dns domain-name and, if required, ip dns name-server commands to create
DNS server entries. Refer to the Extreme SLX-OS Security Configuration Guide for the
SLX 9850 Router for more information.
Verify that the device operates correctly.
• Check the LEDs to verify operation of module components in the device.
Refer to
Interpreting management module LEDs on page 75, Interpreting
interface module LEDs on page 77, Interpreting power supply module
LEDs on page 80, Interpreting fan module LEDs on page 83, and
Interpreting switch fabric module LEDs on page 84.
Quick installation checklists
ExtremeRouting SLX 9850-4 Hardware Installation Guide
9035474-02 Rev AA 27