manualshive.com logo in svg

Extreme Networks ExtremeRouting SLX 9850-4, Руководство по установке оборудования

Поделиться
Скачать
Extreme Networks ExtremeRouting SLX 9850-4 Скачать руководство пользователя страница 148

•

EN 55032/EN 55024 (European Immunity Requirements)
–

EN61000-3-2/JEIDA (European and Japanese Harmonics Spec)

–

EN61000-3-3

China ROHS

Refer to the latest revision of the China ROHS document (P/N 53

‐

1000428

‐

xx) which ships with the product.

FCC warning (US only)

This equipment has been tested and complies with the limits for a Class A computing device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction
manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at the user’s own expense.

Germany statement

Machine noise information regulation - 3. GPSGV, the highest sound pressure level value is 78.0 dB(A) in accordance with EN ISO
7779.

Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 78.0 dB(A) gemäss EN ISO 7779.

KCC statement (Republic of Korea)

Class A device (Broadcasting Communication Device for Office Use): This device obtained EMC registration for office use (Class A), and
may be used in places other than home.  Sellers and/or users need to take note of this.

China ROHS

ExtremeRouting SLX 9850-4 Hardware Installation Guide

148

9035474-02 Rev AA

Содержание ExtremeRouting SLX 9850-4































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды