12
19.
Next let’s assemble the main landing gear and install them on the fuselage. If
flying off of tall grass you may want to forgo the wheel spats. Locate the 2 main
gear legs, 2 wheel spats, 2 axles with retaining nuts, 2 wheels, 2 collars and 2 ply
wood plates as well as 2 4mm bolts, washers and nuts.
20.
Scuff the inside of the spats with sandpaper and glue the plywood plate to the spat
with 30 minute epoxy as shown. Repeat for the other spat.
21.
Once dry drill a hole through the ply plate and spat as shown to accept the
threaded portion of the axle. Slide the threaded portion of the axle through the
spat and through the landing gear leg and secure with a nylon insert lock nut. The
friction of the washer on the axle will keep the spat in place.
Содержание YAK-55SP
Страница 1: ...YAK 55SP Profile ARF Instruction Manual Copyright 2008 EXTREME FLIGHT RC Ltd ...
Страница 14: ...14 ...