Extreme Flight YAK-55SP, Инструкция по эксплуатации

Страница: 17 / 20

17
28.
Use the manufacturer supplied mounting hardware to install the 2 aileron servos
as shown. Be sure the output shaft is centered in the pre-cut hole.
29. Now let’s assemble and install the control linkages. Locate the 4 pushrods, 8 ball
links, 8 2mm bolts, nuts and washers. We also recommend the use of the Dubro
Super Strength servo arms. All of the linkages for the ailerons, elevator and
rudder assemble the same way. Electronically center your servos. Thread a ball
link onto each end of the pushrod. Insert a 2 mm bolt into a washer, through the
ball link and into the servo arm or control horn. Secure with another washer and
nut. Be sure to apply a drop of Loctite to prevent the linkage from coming apart
due to vibration. Please see picture for detail.