ExtraHop Trace Admin UI, Руководство пользователя

Страница: 56 / 58

ExtraHop 8.8 ExtraHop Trace Admin UI Guide 56
Trace appliance and when the extended storage unit was configured on a RAID controller other than the
Trace appliance it was originally connected to.
For extended storage units disconnected and then reconnected to the same Trace appliance
1. Log in to the Administration settings on the ExtraHop system through
https://<extrahop-
hostname-or-IP-address>/admin
.
2. In the Appliance Settings section, click Disks .
3. Click Extended Storage Units .
4. Click Import foreign packetstore disks .
The extended storage unit is automatically configured and ready to store packets.
For extended storage units configured on a device other than the Trace appliance
1. Log in to the Administration settings on the ExtraHop system through
https://<extrahop-
hostname-or-IP-address>/admin
.
2. In the Appliance Settings section, click Disks .
3. Click Extended Storage Units .
4. Click Import foreign packetstore disks , and then click OK .
5. In the RAID Info section, click Unconfigure , and then click OK .
6. After the packetstore disk is deleted, click Attach and then click OK .
The extended storage unit is automatically configured and ready to store packets.
Reset Packetstore
In certain circumstances, you might want to reset the packetstore on the Trace appliance. For example,
if you accidentally collected packets with sensitive data or from the wrong data feed, you can reset the
datastore so the packets do not appear in any packet queries.
Warning: If you reset the packetstore, all existing packets stored on the Trace appliancewill be
inaccessible to packet queries.
1. In the Appliance Settings section, click Reset Packetstore .
2. Type
YES
in the confirmation field and then click Reset Packetstore .
It typically takes less than a minute to reset the packetstore.