28
ENGLISH
DELTA T
This function allows the hysteresis thresholds to be set for stove ignition (DELTA-T ON) and switch-off (DELTA-T OFF), used as an ambient
temperature adjustment interval if not managed by an external thermostat.
The possible values of
DELTA-T
vary between 0.5 - 5 °C
To set:
OK > SETTINGS > DELTA-T
FIRST LOAD
This function allows you to activate the gearmotor for loading pellets continuously.
Before starting the function, make sure the stove is cold and “OFF”.
To set:
OK > SETTINGS > FIRST LOAD
To stop continuous loading, just press and hold key 6 for 2 seconds.
QUICK ACCESS:
Before starting the function, make sure the stove is cold and “OFF”.
Press keys 6 + 4 at the same time for two seconds until the message “FIRST LOAD” is displayed.
To stop continuous loading, just press and hold key 6 for 2 seconds.
CLEANING
This function allows to open the burn pot base, facilitating the combustion chamber cleaning operations.
CONTROLS PROCEDURE:
Press key 6
Press 3 until
SETTINGS
appears and confirm by pressing 6
Keep pressing 3 until
CLEANING
appears and confirm by pressing 5 and wait for the burn pot bottom to open.
Scrape the walls of the combustion chamber using the special tool supplied and let the residual ash drop into the ash drawer.
Press key 1 to end and wait for the main screen to reappear.
OPEN THE DOOR ONLY WHEN THE OPERATION IS COMPLETE! THE DISPLAY WILL INDICATE THAT THE DOOR HAS BEEN OPENED!
RESET
Allows the user to reset all editable values to the default values.
To set:
OK > SETTINGS > RESET.
EASY CONTROL
The functions allows for two values to be set:
OFF
(disabled - factory default)
ON
(enabled)
Activation (EASY CONTROL = ON) is recommended in the event that there is an excessive formation of combustion residues in the flue
during operation at reduced power (see FLUE EXHAUST chapter).
Caution! It is advisable to activate the EASY CONTROL function under the supervision of a qualified technician.
To set:
OK > SETTINGS> EASY CONTROL.
