24
ENGLISH
FRONT AIR
This menu allows the front ventilation motor speed to be set.
Range: (
COMFORT
,
AUTO
,
OFF
).
If comfort mode is selected, the front air speed is reduced.
To set: OK >FRONT AIR>SET
EASY SETUP
The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change without altering
pellet quality. By using the
EASY SETUP
function, it is possible to change the calibration of the volumetric weight by increasing or decreasing
the preset values.
In the stove program, the available values range from “– 3” to “+ 3”; all stoves are calibrated during production with the optimal value which
is 0
If you notice an excessive deposit on the burning pot, access the
EASY SETUP
program and lower the value by one unit to “- 1”; then wait
until the next day and if there is no improvement, decrease again, to a maximum of “- 3”. Instead, if it is necessary to increase the calibration
of the volumetric weight of the pellet, change the factory value from “0” to “+ 1, + 2, + 3” as required.
To set:
OK > EASY SETUP
EXCESSIVE PELLET DEPOSIT IN BURN POT
NORMAL OPERATION
MINIMUM PELLET DEPOSIT IN BURN POT
-3
-2
-1
0
+1
+2
+3
THIRD DECREASE
RANGE IF THE
FIRST TWO ARE
INSUFFICIENT
SECOND
DECREASE
RANGE IF
THE FIRST IS
INSUFFICIENT
FIRST DECREASE
RANGE (TEST FOR
1 DAY)
OPTIMAL FACTORY
VALUE
FIRST INCREASE
RANGE
SECOND
INCREASE RANGE
IF THE FIRST IS
INSUFFICIENT
THIRD INCREASE
RANGE IF THE
FIRST TWO ARE
INSUFFICIENT
N.B.: If these adjustments do not solve the problem of pellet deposits in the burn pot, please contact your local service centre.
