Extraflame DUCHESSA IDRO, Руководство пользователя

Страница: 26 / 48

PRODUCT FUNCTIONALITY
26
Chapter 7
PRODUCT FUNCTIONALITY
CONTROL BOARD
REMOTE CONTROL
SENSOR D1 D2
1
D
ON/OFF BUTTON
By pressing button 1 it is possible to switch the stove on and off automatically.
2-3
D
WATER TEMPERATURE SETTING
Buttons 2 and 3 are used to adjust the water temperature which will then be distributed inside the plant.
4-5
D
FUNCTIONING POWER
The power can be adjusted using buttons 4 and 5; the machine has 5 diff erent powers
Display D1 to view the various messages.
Display D2 to view the power set.
CURRENT DATE AND TIME ADJUSTMENT
Follow the procedure below to adjust these parameters:
Remove and restore the stove power supply using the master switch or using the power supply 1.
cable.
The stove will fi rst display the microprocessor version, 2. “TIME” , then “LI 3” and then “OFF” .
When 3. “TIME” appears, press button 5 once to access the adjustment mode.
Display 4. D1 will show the current time, the hours fl ashing while the minutes are fi xed: use keys 2 and 3
to adjust the time and then confi rm using key 5.
At this point the hours will become fi xed and the minutes will start to fl ash: use keys 2 and 3 to adjust 5.
the minutes.
To go back to selection of the hours, press button 4 again or escape and confi rm using button 1.
fi gure 7.2