Performing treatment
43
GB
•
Switch the appliance on using the
ON/OFF
switch.
The appliance moves to its start position:
-
The display shows 0 minutes treatment time
-
The bottom display shows the temperature setting 4 on the 5-level tem-
perature scale.
9.3
Notifications / beeper functions
An
E
with a number in the display:
-
Indicates an error with the appliance. You will hear 10 warning beeps
(see “Troubleshooting” on page 53).
Error message
E 0
in the display:
-
Indicates an empty water boiler. You will hear 10 warning beeps.
-
Fill the water boiler.
Flashing symbol in the display:
-
Cover is open.
Signal beeps:
10 warning beeps = water boiler is empty / appliance error.
•
Fill the water boiler.
5 warning beeps = input treatment time exceeds max. (60 min.).
•
Enter the treatment time (maximum 60 minutes).
10 increasingly loud beeps = end of treatment.
9.4
Ionisation
Ionisation is automatically activated when the appliance starts:
the lit signal light of the
ION
button indicates that ionisation mode is activated.
Ionisation mode can optionally be switched off by pressing the
ION
button.
Pressing the button again switches ionisation back on.
In manual and programme mode:
ionisation starts after an interval of 5 minutes. This is followed by a pulsed emis-
sion of ions.
During follow-up treatment time:
•
If ionisation was switched on during the previous treatment, ionisation
starts immediately, without the interval of 5 minutes.
9.5
Work rules
Important notes on treatment duration and temperature
•
Comply with all safety instructions.
•
The treatment duration and temperature selected are your responsibility as
a hairdressing professional.
•
The exposure time of the products also depends on the treatment tempera-
ture selected and must be taken into account by you as a professional when
determining the temperature setting appropriate for the product used.
Start position
__P71.book Seite 43 Freitag, 5. November 2021 9:42 09