Exmark QSS708GEM42200 Скачать руководство пользователя | Manualshive

Страница: 31 / 76

background image

Operation

4. Move the bypass levers forward through the key

hole and down to lock them in place (Figure 19).

Note:

Ensure this is done for each lever.

5. Turn the ignition key on and disengage the

parking brake.

Note:

Do not start the machine.

Note:

The machine is now able to be pushed

by hand.

g017303

1 2

3

Figure 19

1.

Bypass-lever locations

3.

Lever position for
pushing the machine

2.

Lever position for
operating the machine

6. When finished, ensure that the key has been

returned to the Stop position to avoid draining
the battery charge.

Note:

If the machine fails to move, the electric brake

may still be engaged. If necessary, the electric brake
can be released manually; refer to

Releasing the

Electric Brake

section in Maintenance.

Side Discharge

The mower has a hinged discharge deflector that
disperses clippings to the side and down toward the
turf.

DANGER

Without the discharge deflector, mulch kit, or
entire grass collection system mounted in place,
you and others are exposed to blade contact and
thrown debris. Contact with rotating mower
blade(s) and thrown debris will cause injury or
death.

•

Never remove the discharge deflector from
the mower because the discharge deflector
routes material down toward the turf. If the
discharge deflector is ever damaged, replace
it immediately.

•

Never put your hands or feet under the
mower.

•

Never try to clear discharge area or mower
blades unless you move the blade control
switch to Off and rotate the ignition key to
Off. Also remove the key and pull the wire
off the spark plug(s).

Transporting the Machine

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required by
law. Please carefully read all the safety instructions.
Knowing this information could help you, your
family, pets, or bystanders avoid injury.

WARNING

Driving on the street or roadway without turn
signals, lights, reflective markings, or a slow
moving vehicle emblem is dangerous and can
lead to accidents causing personal injury.

Do not drive machine on a public street or
roadway.

To transport the machine:

1. If using a trailer, connect it to the towing vehicle

and connect the safety chains.

2. If applicable, connect the trailer brakes.

3. Load the machine onto the trailer or truck.

4. Stop the engine, remove the key, set the brake,

and close the fuel valve.

5. Tie down the machine near the front caster wheels

and the rear bumper (Figure 20).

31

«
...
29
30
31
32
33
...
»

Содержание QSS708GEM42200













































































Отзывы:

Нет отзывов

Похожие инструкции для QSS708GEM42200

MULTICLIP Pro 51 S

Бренд: Stiga Страницы: 10

Бренд: FERRI Страницы: 139

Бренд: MTD Страницы: 28

Бренд: MTD Страницы: 4

Бренд: Sears Страницы: 56

Бренд: Meec tools Страницы: 30

Бренд: Stihl Страницы: 120

30710 Groundsmaster 300

Бренд: Toro Страницы: 20

G - PLEX WD series

Бренд: Ransomes Страницы: 181

Бренд: Gama Garden Страницы: 19

Бренд: Fieldmann Страницы: 24

Бренд: Honda Страницы: 56

Бренд: Poulan Pro Страницы: 32

LAWN TRACTOR PE12538LT

Бренд: Poulan Pro Страницы: 44

Бренд: Cub Cadet Страницы: 52

Бренд: RHINO Страницы: 156

Бренд: Weed Eater Страницы: 4

Бренд: Weed Eater Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды