Exmark QSS708GEM42200 Скачать руководство пользователя страница 29

Страница: 29 / 76

Operation

Adjusting the Anti-Scalp
Rollers

It is recommended to change the anti-scalp roller
position when the height of cut has changed.

1. Stop the machine and release the traction-control

pedal to place the machine in the neutral position.

2. Disengage the PTO.

3. Engage the park brake.

4. Stop the engine, remove the key and wait for all

moving parts to stop.

5. After adjusting the height of cut, adjust the

anti-scalp rollers by removing the nyloc nut.

6. Adjust the anti-scalp rollers for the normal

operating conditions. Place rollers in one of the
positions shown in Figure 14 or Figure 15. Rollers
will maintain 3/4 inches (19 mm) clearance to
the ground to minimize gouging and roller wear
or damage.

Note:

For Maximum Deck Flotation,

place

the rollers one hole position lower. Rollers should
maintain 1/4 inch (6.35 mm) clearance to the
ground. Do Not adjust rollers to support the
deck.

Figure 14

42 Inch Deck

Anti-scalp roller mounting bracket

Below 2 1/2 inches (64mm) cutting height

2 1/2 inches (64mm) and above cutting height

Figure 15

50 Inch Deck

For cutting heights above 3 1/2 inches (90 mm)

use the bottom hole. The rollers will still be effective

against scalping.

Anti-scalp roller
mounting bracket

Cutting height

7. Torque hardware to 27-33 ft-lb (37-45 N-m) or

loss of roller may result.

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.

Figure 16

Changing the Seat Ride
Suspension

The number of seat springs can be changed to
maximize rider comfort. More springs should be used
with heavier operators and on rough terrain. Fewer

Содержание QSS708GEM42200













































































Результаты поиска

Содержание QSS708GEM42200

Отзывы:

Exmark QSS708GEM42200, Руководство оператора, Страница: 29 / 76

Результаты поиска

Содержание QSS708GEM42200

Отзывы: