Exmark QSS708GEM42200 Скачать руководство пользователя | Manualshive

Страница: 20 / 76

background image

Operation

Operation

Controls

Note:

Become familiar with all of the controls

before you start the engine and operate the machine.

Ignition Switch

Located on control panel.

The ignition switch is used to start and stop the
engine. The switch has three positions “OFF”,
“RUN” and “START”. Insert key into switch and
rotate clockwise to the “ON” position. Rotate
clockwise to the next position to engage the starter
(key must be held against spring pressure in this
position).

Figure 4

Exmark Engine with 50 Inch Deck Shown

1.

SmartPark™ (Parking brake) switch

2.

Choke control

3.

Throttle lever

4.

Ignition switch

5.

Blade control switch (power take-off)

6.

Parking brake-On

7.

Parking brake-indicator light

8.

Parking brake-Off

Note:

Brake must be engaged, traction-control pedal

in neutral, and PTO switch “OFF” to start engine.
(It is not necessary for the operator to be in the seat
to start the engine.)

Turning the key to the “OFF” position will stop the
engine; however, always remove the key when leaving
the machine to prevent someone from accidentally
starting the engine.

Blade Control Switch (Power
Take-Off)

Located on the control panel.

The blade control switch, represented by a power
take-off (PTO) symbol, engages and disengages
power to the mower blades (see Figure 4).

Pull up on the blade control switch to “ON” to
engage the blades.

Push down on the blade control switch to “OFF”
to disengage the blades.

Throttle Lever

Located on control panel.

The throttle is used to control engine speed. Moving
throttle lever forward will increase engine speed and
moving throttle lever to the rear will decrease engine
speed (see Figure 4).

Choke Control

The choke is used to aid in starting a cold engine. Do
Not run a warm engine with the choke in the “ON”
position.

•

Units with Exmark Engines: Pulling up on the
choke control will put the choke in the “ON”
position and pushing down the control will put
the choke in the “OFF” position.

•

Units with Kohler Engines: The engine is
integrated with an auto-choke. There is no need
to manually prime or choke these engines.

Steering Wheel

The steering wheel is located in front of the seat.

The steering wheel controls the direction and turning
radius. The rear tires operate independently of each
other, like a zero-turn, which allows for sharp turns
and to turn in different directions quickly.

The steering wheel has three positions for operation
and one, full-up position. Use the full-up position for
stepping on and off the machine and getting out of
the seat. When operating the machine, position the
steering wheel where you have the best control of the
machine and are most comfortable.

20

«
...
18
19
20
21
22
...
»

Содержание QSS708GEM42200













































































Отзывы:

Нет отзывов

Похожие инструкции для QSS708GEM42200

Бренд: MTD Страницы: 12

Бренд: Yazoo Страницы: 9

Бренд: MTD Страницы: 29

Бренд: Ransomes Страницы: 184

Бренд: Weed Eater Страницы: 48

Бренд: Murray Страницы: 144

Бренд: Snapper Страницы: 224

Бренд: Gtech Страницы: 32

Бренд: MID WEST PRODUCTS Страницы: 4

Бренд: Ferris Страницы: 48

Бренд: Cub Cadet Страницы: 24

Бренд: Adano Страницы: 128

Бренд: Cub Cadet Страницы: 40

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды