Exlar Tritex II DC Series, Инструкция по установке и обслуживанию

Страница: 37 / 70

Curtiss-Wright | Tritex II DC Rev. J PN49220 2/8/2016 37
CANopen
The CANopen circuit is optically isolated from the drive main power.
There are two methods of connecting to the Tritex with the CANopen
option. If the connector option (COP) is chosen, the only option available
for 60mm actuators, a five pin connector (Turck FS 57-.1) will be
presented to the user for connection or “T-ing” off of.
For the 75mm and 90mm models, there is also the option (CON) of
user wiring in which individual wires can be passed through the cable
gland or NPT port and inserted into connectors. A 120
Ω
resistor is
installed from the factory, in J3 pins 6 & 7, as a termination resistor and
can be removed for daisy chaining or changed to another value if
desired.
CANopen CON Option
CANopen COP Option
Signal Pin Color
CAN H 4 White
CAN L 5 Blue
Shield 1 Gray