Exit Light ESC-200P, Руководство пользователя

Страница: 6 / 21

Hermiankatu 6–8, 33720 Tampere | +358 10 773 5400 | info@exilight.com |
MANUAL
1. Normal status
Everything Ok: The display shows date and time
- “Everything Ok” “HH:MM”
Error code
- The display shows the latest error that has not been set off
- The top line in the display shows the amount of errors and the lower line shows the
appliance ID (D), the loop (L) and the error code (E). For example:
Not set off 005/005 //
D06397 L2 E03
- You can what the error code means by pushing the “LEFT” button. It will indicate what the
error code actually means, For example
“led disconnected”
- To set off the error codes you have to push the “RIGHT” button two times.
2. Browsing errors
By pushing “SET” you can browse the errors that have been detected in the past.
The errors will be shown chronologically so that the latest error will be the first to show up on the
display. You can browse the errors by pushing “UP” or “DOWN”.
The display shows when the error was detected, appliance ID (D), loop (L) and the error code (E).
All error codes can be found in table 1 and 2.
3. Annual test time
Set the time and date for annual duration test
4. LED test time
Set the time for LED blink test.
5. Monthly test time
Set the time and date for monthly test.
6. Demomode
Here you can set demomode on. Demomode is only for presentation.
When the demomode is on the errors come more quickly to the panel.
7. Start monthly test
Function test is done automatically every month but here you can start that test manually.
8. Start annual test
Annual duration test is done automatically every year but here you can start that test manually.