Hermiankatu 6–8, 33720 Tampere | +358 10 773 5400 | [email protected] |
MANUAL
Picture 7. When the Error is set off the display will show
“
Everything OK
”
.
Remote controlling the Emergency lights
In case that there are some Emergency lights lit along with the Exit lights:
Make sure that the Remote Control is not on (Picture 8.).
- Remote controlling the Emergency lights is operated with NC contact. If there is no
remote controlling the lights, there is a loop in the terminals as shown in Picture 8.
- If there is a blackout or the remote control is on, the buttons in Centers display
stops working. This is for as long as the blackout or remote control is on.
Picture 8. Remote controlling the ESC-200 Center.
Input 1 controls Emergency lights
in Loop 1, input 2 controls Emergency lights in Loop 2, inputs 3 and 4 controls all the
emergency lights connected to the ESC-200 Center.
