Hermiankatu 6–8, 33720 Tampere | +358 10 773 5400 | [email protected] |
MANUAL
Setting the luminaire location
Connect the panel to your PC.
Open EXIL2 software and choose the right port and language.
Press the read button. After the software has read all the addresses you can write or
change the locations. Maximum letter is 16 in one location.
Write button write the locations to the panel.
With import button you can bring file which include the addresses. The file must be written
in the following way: every lane has Loop information, address information, location
information and it must be separate with comma. The file must be text file. For example:
Loop1,17515,Hall 1
Loop1,17670,Hall 2
Loop1,17701,Corridor
Loop1,17793,Garage
Loop2,17753,Garage2
Loop2,17792,Hall 3
With export button you transfer the tex file to the panel.
After the panel has read the file, locations should be now in your panel. You can now
remove the port cable.
