background image

5

Contents

The original language of this manual is English

 

english

Contents

6. Technical data
7. Package contents

 Safety

8. Safety instructions
10. Intended use and product features

 Battery 

Charger

11. Charger  information
11. Charger safety instructions
14. Charger operation
16. Charger maintenance, environment and guarantee

 Operation

17. Before operating the tool
17. Mounting the battery
17. Precise setting of the cutting point
17. Setting the pipe on supports
18. Attaching the pipe saw to the pipe
18. Piercing the pipe wall
18. Sawing around a pipe
19. Control card
19. Straightness of cut and adjusting wheel

20. 

Installing and changing the saw blade

21. 

Service and maintenance instructions

22. 

Environment /

Disposal

22. 

Guarantee/

Guarantee conditions

22. 

Tips for users

 

Exploded view 

(separate attachment)

De

fi

 nitions: Safety guidelines

The de

fi

 nitions below describe the level of severity for each signal word. Please read the manual and 

pay attention to these symbols.

DANGER

: Indicates an imminently hazardous situation which, if not avoided, 

will 

result in 

death or serious injury

.

WARNING

: Indicates a potentially hazardous situation which, if not avoided, 

could 

result in 

death or serious injury

.

CAUTION

: Indicates a potentially hazardous situation which, if not avoided, 

may 

result in 

minor or moderate injury

.

NOTICE

: Indicates a practice 

not related to personal injury 

which, if not avoided, 

may 

result 

in 

property damage

.

Denotes risk of electric shock.

Содержание PipeCut 170























Отзывы: