eXact PipeCut 170, Руководство по эксплуатации

Страница: 15 / 22

15
NOTE: The steady green light indicates
that the battery pack is fully charged or in
slow charging mode to maintain battery
pack charge level.
NOTE: Depending on room temperature,
line voltage, and existing charge level,
initial battery charging may take longer
than 60 minutes.
NOTE: After normal use, the battery pack
will require 60 minutes of charging before
it will be fully charged. A completely
discharged battery will require more than
60 minutes in order to be fully charged.
NOTE: Disconnect charger from power
source when not in use.
Important Charging Notes
1. Longest life and best performance can be
obtained if the battery pack is charged when
the surrounding air temperature is between
65°F (18°C) and 75°F (24°C). DO NOT
charge battery pack in an air temperature
below 40°F (4.5°C), or above 105°F (40.5°C).
This is important and will prevent serious
damage to battery pack.
2. The charger was designed to fast charge
battery pack between 32°F (0°C) and 113°F
(45°C). If the battery pack just inserted is too
cold or too hot, the charger will not charge
it and only the green LED indicator and the
red LED indicator will blink alternatively
and continuously. After the battery pack
temperature fi t standard temperature range,
the fast charging procedure will be started
automatically.
3. If battery pack is not charged properly (the
red LED indicator will blink):
a. Check battery pack terminals for dirt.
Clean with cotton swab and alcohol if
necessary.
b. If battery pack is not still charged properly,
take or send charger (and battery pack) to
the closest Authorized Service Center.
4. Under certain conditions, with the charger
plugged into the power source, the exposed
charging contacts inside the charger can
be shorted by foreign material. Foreign
materials of a conductive nature such as,
but not limited to, steel wool, aluminium
foil, or any build-up of metallic particles
should be kept away from charger cavities.
Always unplug the charger from the power
source when there is no battery pack in the
battery compartment. Unplug charger before
attempting to clean.
5. Do not freeze or immerse charger in water or
any other liquid
WARNING!! Don‘t allow any liquid to get
inside charger. Electric shock may result.
To facilitate the cooling of the battery
pack after use, avoid placing the charger
in a warm environment such as in a metal
shed, or an uninsulated trailer.
CAUTION: Never attempt to open the
charger for any reason. If the plastic
housing of the charger breaks or cracks,
return to the closest Authorized Service
Center.
NOTE: This product is not user
serviceable. There are no user
serviceable parts inside the charger.
Servicing at the closest Authorized
Service Center is required to avoid
damage to static sensitive internal
components.
READ ALL OF THE INSTRUCTIONS IN THE
BATTERY CHARGER SECTION OF THIS
MANUAL BEFORE ATTEMPT TO CHARGE
THE BATTERY PACK FOR YOUR TOOL.
Always use correct battery pack (pack supplied
with tool or replacement pack exactly like it.)
Never install any other battery pack. It will ruin
your tool and may create a hazardous condition.
Important Battery Pack Notes
1. Battery pack can remain in the charger
without damaging the battery or the charger.
The battery will remain fully charged in the
charger.
2. If you remove the battery pack from the
battery compartment before the battery is
fully charged, it will not cause any damage to
the battery.
3. If several charging operations are performed
consecutively, the charger can become
warm. It is normal and does not indicate any
technical defect.
Charger Operation
english