22
Environment, Guarantee, Tips
english
Environment
Separate collection. This product must
not be disposed of with normal household
waste. When your Exact PipeCut - machine
is worn out, do not dispose of it with normal
household waste. This product must be
recycled separately. Separate recycling
of used products and packaging facilitate
recycling and recovery of materials. Reusing
of recycled materials helps prevent pollution
of environment. According to local regulations
it is possible to deliver household appliances
to municipal rubbish depositories or to the
dealer when buying a new product.
Guarantee
Warranty terms valid from 01.01.2015
If the Exact PipeCut Saw becomes unusable due to
material or manufacturing defects within the Warranty
Term or *Extended Warranty Term at our discretion we will
repair the Exact PipeCut Saw or supply an entirely new or
factory reconditioned Exact PipeCut Saw at no charge.
Warranty Term / *Extended Warranty Term
The Exact Tools Warranty Term is for 12 months from
date of purchase. *By registering on-line (exacttools.
com/Warranty Registration) you will receive an
additional 12 months Warranty Term for FREE.
Warranty registration must be completed within one
month of purchase.
Password for registration is; 1yearmore
The Warranty is only valid if:
1.) Copy of a dated purchase receipt is returned to the
Authorized Warranty Repair Center or has been uploaded
to our website at the time of warranty registration.
2.) The Exact PipeCut Saw has not been misused.
3.) No attempt has been made by non-approved
persons to repair the saw.
4.) The Exact PipeCut Saw has been used in
accordance with the operating, safety, and servicing
instructions provide in the manual.
5.) The Exact PipeCut Saw has been delivered to an
Authorized Warranty Repair Center within the term
of the warranty.
Note:
The Exact PipeCut Saw is to be shipped to the
Authorized Warranty Repair Center freight prepaid.
If the Exact PipeCut Saw is repaired under Warranty
the return shipment will be made freight prepaid. If the
Exact PipeCut Saw is not repaired under Warranty the
return shipment will be made freight collect.
Please Note: The following items or services are
excluded from Warranty claims:
- Saw
Blades
- Overload Protection Fuse
- Carbon
Brushes
- Gripping Unit Wheels
- Blade
Flange
- Attachment
Flange
- Pulling Flange Washer
- Normal Wear and Tear
- Errors Due to Misuse or Accident
- Water, Fire and Physical Damage
- Battery charger and batteries
- Adjustment of Adjustment Wheel
Tips for using Exact
PipeCut saws
Diamond blade should only be used for cutting cast iron
pipe. It is not recommended to cut cast iron with TCT or
Cermet blades.
Clean the inside of the blade guards after cutting plastic
pipe.
Smaller pipe is easily cut by rotating the pipe by hand
either on a table or on the
fl
oor. Please note: rotate pipe
towards you when rotating by hand and be careful not
to rotate too fast.
Check the condition of the blade regularly.
The cutting procedure is divided into two stages;
fi
rst
saw through the pipe wall, then complete the cut by
sawing around it.
Do not overload the saw by cutting continuously. The saw
will be overheated and the metal parts can become burning
hot. This will also damage the motor and the blade. The
rule is 2.5/1.5 minutes in use and 7.5/8.5 minutes rest.
Keep the feeding speed constant. This will extend
the lifetime of the blade. For example cutting time
for a steel pipe diameter of 6’’ (170 mm), and a wall
thickness of 1/5’’ (5 mm), is 15-20 seconds, and for
a cast-iron pipe diameter of 4’’ (110 mm), with a wall
thickness of 1/6’’ (4 mm) is 20 to 25 seconds.
Always keep the motor unit in the upright position. The
yellow mark of the unlock button is then visible. Never
place the Pipe Cut Saw on the pipe in the locked /
cutting position.
Factors that affect the lifetime of the saw blade:
• material of the pipe
• correct blade type for material being cut
• correct motor speed setting (model 170E)
• wall thickness of the pipe
• feeding
speed
• smoothness of the pipe
• user’s general skills
• cleanness of the pipe
• rust on the pipe
• welded seam in the pipe
• blade
speed
Factors that affect the straightness of the cut:
• condition of the saw blade
• wall thickness of the pipe
• feeding
speed
• smoothness of the feed
• user’s general skills
• cleanness of the pipe
• roundness of the pipe
• gripper unit too loose or too tight
• blade assembled too tight
Due to continuous product development, the
information in this instruction book may change.
We do not give separate noti
fi
cation of changes.
Содержание PipeCut 170
Страница 3: ...3 ...
