EWM WEGA 351, Руководство по эксплуатации

Страница: 75 / 89

Operating problems, causes and remedies
Check the machine type setting
Item No.: 099-004934-EWM01 75
NOTE
All user settings will be overwritten with factory settings and must therefore be checked
afterwards, or set up again!
After resetting the machine control to the factory settings, it is essential that the machine
type used is checked and reset if necessary.
Operating
element Action Result
1 x
Switch off the welding machine.
+
Press and hold both buttons.
1 x
Switch on the welding machine, "rES" is shown briefly on the display.
9.3 Check the machine type setting
NOTE
When first switching on after resetting to the factory settings, the machine type is
displayed under the designation "tyP".
If an incorrect machine type is shown, it must be reset.
„tyP 00“ SATURN 251
„tyP 01“ SATURN 301
„tyP 02“ SATURN 351
„tyP d02“ WEGA 351, SATURN 351 DG
„tyP d03” WEGA 401,451
„tyP d04” WEGA 501,601
9.4 Setting the machine type
Operating
element Action Result
1 x
Switch off the welding machine.
+
+
Press and hold both buttons.
1 x
Switch on the welding machine, "Anl" is shown on the display.
Whilst "Anl" is being displayed, set the machine type:
0 - SATURN 251 2 - SATURN 351
1 - SATURN 301 3 - WEGA (all)