EWM WEGA 351 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 89

background image

Commissioning

General

50

Item No.: 099-004934-EWM01

6

Commissioning

6.1

General

DANGER

Risk of injury from electric shock!

Contact with live parts, e.g. welding current sockets, is potentially fatal!
• Follow safety instructions on the opening pages of the operating instructions.
• Commissioning may only be carried out by persons who have the relevant expertise of

working with arc welding machines!

• Connection and welding leads (e.g. electrode holder, welding torch, workpiece lead,

interfaces) may only be connected when the machine is switched off!

CAUTION

Risk of burns on the welding current connection!

If the welding current connections are not locked, connections and leads heat up and can
cause burns, if touched!
• Check the welding current connections every day and lock by turning in clockwise direction, if

necessary.

CAUTION

Using protective dust caps!

Protective dust caps protect the connection sockets and therefore the machine against
dirt and damage.
• The protective dust cap must be fitted if there is no accessory component being operated on

that connection.

• The cap must be replaced if faulty or if lost!

6.2

Area of application – proper usage

WARNING

Hazards due to improper usage!

Hazards may arise for persons, animals and material objects if the equipment is not used
correctly. No liability is accepted for any damages arising from improper usage!
• The equipment must only be used in line with proper usage and by trained or expert staff!
• Do not modify or convert the equipment improperly!

These welding machines are only suitable for GMAW welding and GMAW brazing.

CAUTION

Damage due to the use of non-genuine parts!

The manufacturer's warranty becomes void if non-genuine parts are used!
• Only use system components and options (power sources, welding torches, electrode

holders, remote controls, spare parts and replacement parts, etc.) from our range of
products!

• Only insert and lock accessory components into the relevant connection socket when the

machine is switched off.

«
...
48
49
50
51
52
...
»

Содержание WEGA 351


























































































Отзывы:

Нет отзывов

Похожие инструкции для WEGA 351

Бренд: R.V.R. Elettronica Страницы: 38

Бренд: E-Mu Страницы: 72

Бренд: E-Mu Страницы: 44

Бренд: QSC Страницы: 2

Бренд: QSC Страницы: 2

Бренд: QSC Страницы: 16

Бренд: QSC Страницы: 4

Бренд: Samsung Страницы: 33

Бренд: 1 Sound Страницы: 92

Бренд: NEC Страницы: 16

SAPPHIRE COMPACT 309150001

Бренд: Hygood Страницы: 6

Бренд: Insignia Страницы: 28

Premis PREMIS200

Бренд: Erreka Страницы: 12

Бренд: Karma Страницы: 12

Бренд: Magnavox Страницы: 24

Бренд: NEO Страницы: 40

Бренд: Abloy Страницы: 28

Бренд: Aiwa Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды