EWM WEGA 351 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 89

background image

Safety instructions

General

Item No.: 099-004934-EWM01

11

DANGER

Electromagnetic fields!

The power source may cause electrical or electromagnetic fields to be produced which
could affect the correct functioning of electronic equipment such as IT or CNC devices,
telecommunication lines, power cables, signal lines and pacemakers.
•  Observe the maintenance instructions! (see Maintenance and Testing chapter)
•  Unwind welding lines completely!
•  Shield devices or equipment sensitive to radiation accordingly!
•  The correct functioning of pacemakers may be affected (obtain advice from a doctor if

necessary).

Do not carry out any unauthorised repairs or modifications!

To avoid injury and equipment damage, the unit must only be repaired or modified by
specialist, skilled persons!
The warranty becomes null and void in the event of unauthorised interference.
• Appoint only skilled persons for repair work (trained service personnel)!

WARNING

Risk of injury due to radiation or heat!

Arc radiation results in injury to skin and eyes.
Contact with hot workpieces and sparks results in burns.
• Wear dry protective clothing (e.g. welding shield, gloves, etc.) according to the relevant

regulations in the country in question!

• Protect persons not involved in the work against arc beams and the risk of glare using safety

curtains!

Explosion risk!

Apparently harmless substances in closed containers may generate excessive pressure
when heated.
• Move containers with inflammable or explosive liquids away from the working area!

• Never heat explosive liquids, dusts or gases by welding or cutting!

Smoke and gases!

Smoke and gases can lead to breathing difficulties and poisoning. In addition, solvent
vapour (chlorinated hydrocarbon) may be converted into poisonous phosgene due to the
ultraviolet radiation of the arc!
•  Ensure that there is sufficient fresh air!
•  Keep solvent vapour away from the arc beam field!
•  Wear suitable breathing apparatus if appropriate!

Fire hazard!

Flames may arise as a result of the high temperatures, stray sparks, glowing-hot parts
and hot slag produced during the welding process.

Stray welding currents can also result in flames forming!
•  Check for fire hazards in the working area!
•  Do not carry any easily flammable objects such as matches or lighters.
•  Keep appropriate fire extinguishing equipment to hand in the working area!
•  Thoroughly remove any residue of flammable substances from the workpiece before starting

welding.

• Only continue work on welded workpieces once they have cooled down.

Do not allow to come into contact with flammable material!

• Connect welding leads correctly!

«
...
9
10
11
12
13
...
»

Содержание WEGA 351


























































































Отзывы:

Нет отзывов

Похожие инструкции для WEGA 351

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: iDance Страницы: 10

Бренд: ID Tech Страницы: 10

Бренд: MAJORITY Страницы: 32

Бренд: VeGue Страницы: 12

FORMULA FH56-BAR

Бренд: BIC Страницы: 2

MMA-300/2 PROFI

Бренд: Zenit Powertools Страницы: 10

Бренд: Cairox Страницы: 16

Бренд: Falcon Страницы: 3

Бренд: Nalnor Страницы: 8

Бренд: V-Tec Страницы: 16

Бренд: HEEVE Страницы: 8

Бренд: MET Страницы: 4

Бренд: RoDEK Страницы: 16

Бренд: MOSA Weld Страницы: 36

Universal XL HD Lifter

Бренд: Garage Smart Страницы: 21

Бренд: Harman Kardon Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды