EWM WEGA 351 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 89

background image

Maintenance and testing

Disposing of equipment

Item No.: 099-004934-EWM01

71

7.5

Disposing of equipment

NOTE

Disposal!

In Germany, waste equipment from private households can be disposed of free of charge
at local community collection points. Your local administration point can provide
information on the options available. EWM participates in an approved waste disposal
and recycling system and is registered in the Used Electrical Equipment Register (EAR)
under number WEEE DE 57686922.
• This equipment must be disposed of in accordance with official regulations.

7.5.1

Manufacturer's declaration to the end user

• According to European provisions (guideline 2002/96/EG of the European Parliament and the Council

of January, 27th 2003), used electric and electronic equipment may no longer be placed in unsorted
municipal waste. It must be collected separately. The symbol depicting a waste container on wheels
indicates that the equipment must be collected separately.
This machine is to be placed for disposal or recycling in the waste separation systems provided for this
purpose.

• According to German law (law governing the distribution, taking back and environmentally correct

disposal of electric and electronic equipment (ElektroG) from 16.03.2005), used machines are to be
placed in a collection system separate from unsorted municipal waste. The public waste management
utilities (communities) have created collection points at which used equipment from private households
can be disposed of free of charge.

• Information about giving back used equipment or about collections can be obtained from the

respective municipal administration office.

• EWM participates in an approved waste disposal and recycling system and is registered in the Used

Electrical Equipment Register (EAR) under number WEEE DE 57686922.

• In addition to this, returns are also possible throughout Europe via EWM sales partners.

7.6

Meeting the requirements of RoHS

We, EWM HIGHTEC Welding GmbH Mündersbach, hereby confirm that all products supplied by us which
are affected by the RoHS Directive, meet the requirements of the RoHS (Directive 2002/95/EC).

«
...
69
70
71
72
73
...
»

Содержание WEGA 351


























































































Отзывы:

Нет отзывов

Похожие инструкции для WEGA 351

Бренд: Xilica Audio Design Страницы: 28

Бренд: Samsung Страницы: 77

Бренд: Harman Страницы: 10

Бренд: JBL Страницы: 24

Бренд: rav Страницы: 120

Бренд: Magmaweld Страницы: 172

Бренд: Vandersteen Audio Страницы: 20

HiFi Speaker System

Бренд: Eltax Страницы: 2

Бренд: Velleman Страницы: 18

Бренд: Qtx Страницы: 5

Бренд: DUB Edition Страницы: 9

Бренд: Magicsing Страницы: 23

Бренд: Bose Sicilia Страницы: 24

Бренд: Insignia Страницы: 28

Бренд: SAF Страницы: 59

Бренд: iStorage Страницы: 2

Бренд: Gemini Страницы: 20

Бренд: ADT Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды