EWM TRITON 260 DC, Руководство по эксплуатации

Страница: 5 / 61

Safety instructions
S/1
For Your Safety
Ignoring the following safety precautions can be fatal.
Observe accident prevention regulations.
Designed use
This machine is manufactured according to the current state of the art and current regulations and
standards. It is to be operated only for the designed use (see Chap. Commissioning/Area of
application).
Use not as designed
This machine may be a hazard to persons, animals and property, however, if it is
•
not used as designed
•
used by unskilled persons who have not been trained,
•
modified or converted improperly
Our operating instructions will provide you with an introduction into the safe use of the
machine.
Therefore please read them closely and only start work when you are familiar with them.
Any person involved in operation, maintenance and repair of this machine must read and follow
these operating instructions, especially the safety precautions. Where appropriate, this must be
confirmed by signature.
Furthermore, the
•
relevant accident prevention regulations,
•
generally recognized safety regulations,
•
regionally specific provisions etc. are to be adhered to.
Electric shocks can be fatal
•
The machine may only be connected to correctly earthed sockets.
•
Only operate with intact connection lead including protective conductor and safety plug.
•
An improperly repaired plug or damaged mains cable insulation can cause electric
shocks.
•
The machine may only be opened by qualified and authorised personnel.
•
Before opening, pull out the mains plug. Switching off is not sufficient. Wait for 2
minutes until capacitors are discharged.
•
Always put down welding torch, stick electrode holder in an insulated condition.
•
The machine must not be used to defrost pipes.
Even touching low voltages can cause you to jump and lead to accidents, so:
•
Safeguard yourself against falls, e.g. from a platform or scaffolding.
•
When welding, operate earth tongs, torch and workpiece properly, not in ways for
which they are not intended. Do not touch live parts with bare skin.
•
Only replace electrodes when wearing dry gloves.
•
Never use torches or earth cables with damaged insulation.