EWM TRITON 260 DC, Руководство по эксплуатации

Страница: 35 / 61

4 Quick start – the fastest way to weld
4/1
Preparations Settings Settings and troubleshooting
•
Plug in the mains plug.
(Remember fuse protection!)
•
Set the welding process
Arcforce
R
u
ti
l C
e
ll
Bas
•
Select arcforcing
(only applies to MMA applications and
TRITON 400, 500)
+
•
Plug in the workpiece lead, lock and
attach conductively to the workpiece.
Puls
•
Select TIG pulses or
standard TIG welding
HF
HF
•
Set the ignition mode:
HF
HF ignition
HF Liftarc (contact ignition)
-
•
Insert the welding current plug of the
torch
•
Select the operating mode.
Excess temperature LED on:
•
Duty cycle exceeded >
Allow machine to cool down
•
Connect torch trigger plug.
AMP
•
Select main current
Water deficiency LED:
•
When operating water cooled welding
machines with a cooling module, the
Water Deficiency LED will be active.
•
Establish the shielding gas supply,
adjust the gas flow
AMP %
25
50
75
0 100
•
Select secondary current (in % of main
current)
Collective interference LED:
•
Power unit is switched off. Some
errors are short-term, one-off errors and
the collective interference signal light
goes off again and the welding machine
is ready for welding again.
•
Plug in the remote control connection
plug
10
sec
0
5 15
20
•
Select gas post-flow time
(1 – 20sec.)
•
Switch on machine at the main switch
10
0
5 15
20
sec
•
Select down-slope time (0 – 20sec.)