EWM TRITON 260 DC, Руководство по эксплуатации

Страница: 36 / 61

5 Commissioning
5/1
5.1 Area of application
5.1.1 Designed use
These welding machines are suitable exclusively for TIG, MMA and MIG/MAG welding.
Any other use is regarded as "not as designed", and no liability is assumed for any damage arising
therefrom.
We can only guarantee smooth and trouble-free operation of the machines when used in
conjunction with the cooling units, welding torches and accessories from our delivery programme!
5.1.2 Triton 260
•
MMA directff current welding for rutile and basic coated electrodes.
•
TIG direct current welding with HF ignition or Liftarc for
low- and high-alloy steels, copper, nickel-based alloys and special metals.
•
MIG/MAG welding in combination with an additional wire feed unit (optional) for
steel-CrNi
∅
0.8mm-1.0mm,
aluminium
∅
1.0mm-1.2mm and
cored wires
∅
0.9mm-1.2mm.
5.1.3 Triton 400/500
•
MMA direct current welding for rutile, basic and cellulose electrodes.
•
TIG direct current welding with HF ignition or Liftarc for
low- and high-alloy steels, copper, nickel-based alloys and special metals.
•
MIG/MAG welding in combination with an additional wire feed unit (optional) for
steel-CrNi
∅
0.8mm to 1.6mm,
aluminium
∅
1.0mm to 1.6mm and
cored wires
∅
0.9mm to 1.2mm.
5.2 Setting up the welding machine
Follow safety instructions on the opening pages entitled "For Your Safety"!
Set up the machine so that there is enough room to adjust the operating components.
Ensure that the machine is set up in a stable position and appropriately secured.
5.3 Mains connection
The correct mains plug must be attached to the mains supply lead of the machine.
The connection must be made by an electrician in compliance with current VDE
regulations. The phase sequence is irrelevant and has no effect on the direction of rotation
of the fan!
The operating voltage shown on the rating plate must be consistent with the mains voltage!
For mains fuse protection, please refer to the technical data (chapter 3)!
•
Insert mains plug of the switched-off machine into the appropriate socket.
5.3.1 Reconnecting the mains voltage 400/415V and 440/460V
The plug on the NEF4 must be changed
over according to the mains voltage.
The PCB NEF4 is located inside of the
machine on the left side.
•
For 400/415V: Plug to pos. A
(works setting)
•
For 440/460V: Plug to pos. B