Design and function
Welding programs
099-000141-EW501
12.01.2016
51
5.19.1 Selection and adjustment
Setting welding programs using the welding machine control
Operating
element
Action Result
Display
Press button until signal light
PROG comes on.
Welding current
(left) and program
no. (right)
Select or retrieve program no., e.g. no. 1
Set operating mode (can be specified separately for each
program).
No change
Press until a “P” for program no. is displayed in the left-
hand section of the right-hand display.
Any parameter can be selected and changed in the
function sequence. The changes are transferred to all
other programs in the equivalent way.
Set welding current for the corresponding program (e.g.:
75 A in program 1).
When connecting a potentiometer torch or up/down torch or operating a standard torch in
up/down mode, the program changeover to the welding machine control is blocked!
