Evoqua WALLACE & TIERNAN Barrier M 1200, Руководство по эксплуатации

Страница: 51 / 110

Barrier M
Operation
5.
51
Parameter necessary to determine the fluence (UV dose). This is
either the constant transmission value T
10
specified by the custo-
mer and set at the factory - see data configuration sheet on page
2 of the operating manual or - if transmission measurement is avai-
lable - the current transmission as measured.
Please note
The next menu "Q meas: xxxx m³/h" is only displayed if the "Flow
Rate Monitoring" and/or "Dose Control" function is activated in the
service menu and the "Q signal" setting is either "Auto" or "Man".
Parameter necessary to determine the fluence (UV dose). This in-
volves either the constant flow rate value specified by the custo-
mer and set at the factory - see setting data configuration sheet,
page 2 of the operating manual - or if flow rate measurement is
available the currently measured flow rate. If the “Flow Rate Moni-
toring” function is active
(Service menu - Display Q signal: auto)
this is always the currently measured flow rate.
Display Range / unit Factory setting
Transmission T10 in % ---
Transmis.: xxx%
Display Range / unit Factory setting
Flow rate 0 - 9999 m³/h or
USGPM (gallons
per minute m³/h
Display Range / unit Factory setting
Currently measured
water temperature 0 - 99°C
32 - 199°F °C
Display Range / unit Factory setting
Displays the current
lamp power in per-
cent 70 - 100 % ---
Q meas: xxxx m³/h
Watertemp.: xx°C
EPS Power: xxx %