Evoqua WALLACE & TIERNAN Barrier M 1200, Руководство по эксплуатации

Страница: 69 / 110

Barrier M
Operation
5.
69
5.6 Sacrificial anode
Please note
Sacrificial anodes are dissolving and must therefore be checked in
regular intervals, depending on the application and the local con-
ditions, and replaced if necessary. Refer to chapter Spare parts,
chapter 6.1.3 Housing/Lamps.
5.7 Disinfection monitoring
The automatic disinfection monitoring, the lamps are always run
automatically at the ideal level in accordance with the prevailing
conditions. The display shows the capacity at which the UV lamps
are currently operating (in %).
If the UV intensity at 100 % capacity is lower than the minimum UV
intensity limit value, the green LED "UV
" disappears and the red
LED for "UV " lights up and the error message „*UV value?” is
displayed (see 5.12 Errors).
5.8 Dose control
If the dose control function is activated, the following additional dis-
plays appear in the operator menu
The UV alarm and disinfection monitoring are now based on the
UV dose. If the mesured UV dose is below the factory preset alarm
value for the UV (see setting data configuration sheet, page 2 of
the operating manual), the green LED "UV
" disappears and the
red LED for "UV " lights up and the error message „*UV dose?”
is displayed (see 5.12 Errors). At the same time, a voltage-free
contact is activated and you can also switch the lamps off.
Display
Dose: xxxJ/m² (UV dose)
Transmis.: xxx% (transmission value T
10
)
Q meas.: xxxm³/h (flow rate value)