PRIMACY
LAMINATION
49
Step 2 – Installing the new print head
1
Note down the code shown on the white label stuck on the print head. You will be asked for this code in Step 3.
2
Take the new head and insert it vertically (white connector upwards) raising it in the two guides so as to trap the lugs of the fork in their
slots
1
. Then lower it by pressing on the two forks
2
, a click will be heard.
3
Connect the cable into its socket, making sure it is the right way round. Do not use force, as this part is relatively fragile. Press down
on each side of the connector to ensure the connection is made.
4
The head is back in position.
5
Close the cover. The print head is now fitted.
1
2
3
4
5
