PRIMACY
LAMINATION
46
Freeing Jammed Cards
Control panel displays:
!
Do not turn your printer off, as this cancels pending print jobs in the printer memory.
If there is a mechanical error in the printing module, remove the card as follows:
1
Open the printer cover and remove the ribbon.
2
Press the control button to activate the card transport rollers. If the card is still stuck inside the printer, slide it manually towards the printer
output. If there is more than one card, always push the top one first.
3
Replace the ribbon, then close the printer cover.
If there is a mechanical error in the lamination module, remove the card as follows:
1
Open the door of the lamination module and remove the film.
2
Use the jam-clearing wheel to access the card and remove it.
3
Replace the film, then close the door of the lamination module.
To prevent card jams:
1
Check that the card thickness gauge is correctly adjusted.
2
Check that the thickness of the cards used matches the specifications set out in Appendix A “Technical specifications” in this manual.
3
Check that the cards are flat. Keep them flat.
4
Check that the cards are not stuck together.
MECHANICAL ERROR
• Card jammed in the printer. Print jobs
interrupted.
MECHANICAL ERROR
• Card jammed in the lamination module.
Print jobs interrupted.
